🎉 Up to 70% Off Selected ItemsShop Sale
Thread M6 Terminal (Right Hand) BLACK - 3.2mm Wire
HomeStore

Thread M6 Terminal (Right Hand) BLACK - 3.2mm Wire

Thread M6 Terminal (Right Hand) BLACK - 3.2mm Wire

$0.75

Original: $2.15

-65%
Thread M6 Terminal (Right Hand) BLACK - 3.2mm Wire

$2.15

$0.75

The Story

Where would you normally use this stainless steel wire cable fitting?
For hydraulically swaged cable balustrading with stainless posts.
For more information, please click here to download a PDF that shows where this part would be used for wire cabling.

What is it made out of?
Black 316 Stainless Steel. (it is not a powder-coated finish, meaning it will not chip when crimped)

How do I fasten the cable to it?
The 3.2mm wire cable goes into the open end of the fitting. Use an hydraulic swager to secure the cable. Do NOT use a hand swager or pliers, as the pressure required to press the metal flat is far greater than can be applied by hand.
Adjust the nut to tension the cable (a special spanner can be purchased from our shop to aid the process, but is not 100% necessary).

Can it be used for exterior applications?
As it is 316 grade Stainless Steel it is more than suitable to be used inside or outside.

Thread M6 Terminal (Right Hand) BLACK - 3.2mm Wire - Image 2

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Thread M6 Terminal (Right Hand) BLACK - 3.2mm Wire - Image 3

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Thread M6 Terminal (Right Hand) BLACK - 3.2mm Wire - Image 4

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Description

Where would you normally use this stainless steel wire cable fitting?
For hydraulically swaged cable balustrading with stainless posts.
For more information, please click here to download a PDF that shows where this part would be used for wire cabling.

What is it made out of?
Black 316 Stainless Steel. (it is not a powder-coated finish, meaning it will not chip when crimped)

How do I fasten the cable to it?
The 3.2mm wire cable goes into the open end of the fitting. Use an hydraulic swager to secure the cable. Do NOT use a hand swager or pliers, as the pressure required to press the metal flat is far greater than can be applied by hand.
Adjust the nut to tension the cable (a special spanner can be purchased from our shop to aid the process, but is not 100% necessary).

Can it be used for exterior applications?
As it is 316 grade Stainless Steel it is more than suitable to be used inside or outside.

You may also like

-65%NEW
Thumbnail 1Thumbnail 2

Rivet Nut M6 (Left Hand Thread)

$0.60

$0.21

-65%NEW
Thumbnail 1Thumbnail 2

Rivet Nut M6 (Right Hand Thread)

$0.60

$0.21

-65%NEW
Thumbnail 1Thumbnail 2

M6 Flip Lock Connector (Right Hand)

$4.77

$1.67

-65%NEW
Thumbnail 1Thumbnail 2

M6 Swivel Connector (Left Hand)

$6.84

$2.39

-65%NEW
Thumbnail 1Thumbnail 2

M6 Flip Lock Connector (Left Hand)

$4.77

$1.67

-65%NEW
Thumbnail 1Thumbnail 2

M6 Swivel Connector (Right Hand)

$6.84

$2.39

-65%NEW
Thumbnail 1Thumbnail 2

Thimble for 3.2mm Wire

$0.20

$0.07

-65%NEW
Thumbnail 1Thumbnail 2

PRORIG M8 Tension Rod

$1.75

$0.61

-65%NEW
Thumbnail 1Thumbnail 2

PRORIG M8 Finishing Cap

$2.15

$0.75

-65%NEW
Thumbnail 1Thumbnail 2

PRORIG M8 Rivet Nut

$1.19

$0.42

-65%NEW
Thumbnail 1Thumbnail 2

PRORIG Swage Terminal - 3.2mm Wire (Hex Hand Swager)

$1.27

$0.44

-65%NEW
Thumbnail 1Thumbnail 2

PRORIG M8x32 Threaded Insert

$3.10

$1.08