š Up to 70% Off Selected ItemsShop Sale
$1.87
Original: $5.33
-65%Stainless Wire Balustrading Kit Gā
$5.33
$1.87The Story
Where would you normally use Stainless Wire Balustrade Kit G ?
For hydraulically swaged 3.2mm cable balustrading between timber posts. (Not suitable for metal posts)
This kit can be used for both horizontal and angled (stair) balustrade.
What parts make up the kit ?
1 x SSW052-6 (Lag Terminal Right Hand Thread)
1 x SSW049-6 (Lag Bottle Screw)
What are the fittings made out of ?
316 Stainless Steel, which means they can be used both in external and internal application.
Which wire cable rope is best suited ?
The fittings will work only with 3.2mm stainless wire cable rope.
1 x 19 configuration for the cable is the best fit, but 7 x 7 and 7 x 19 will also work.
Which tools do I need ?
The SSW052-6 (Lag Terminal Right Hand Thread) and SSW049-6 (Lag Bottle Screw) require the use of the IF120X (Hydraulic Swager) to fasten the fitting to the wire.
Other tools that will be handy to complete the job are IF122X (Wire Cutter) and IF133X (Spanner Tensioner).
Do you have any instructions on how to install the kit ?
We sure do. Click on this link to download a PDF.
For hydraulically swaged 3.2mm cable balustrading between timber posts. (Not suitable for metal posts)
This kit can be used for both horizontal and angled (stair) balustrade.
What parts make up the kit ?
1 x SSW052-6 (Lag Terminal Right Hand Thread)
1 x SSW049-6 (Lag Bottle Screw)
What are the fittings made out of ?
316 Stainless Steel, which means they can be used both in external and internal application.
Which wire cable rope is best suited ?
The fittings will work only with 3.2mm stainless wire cable rope.
1 x 19 configuration for the cable is the best fit, but 7 x 7 and 7 x 19 will also work.
Which tools do I need ?
The SSW052-6 (Lag Terminal Right Hand Thread) and SSW049-6 (Lag Bottle Screw) require the use of the IF120X (Hydraulic Swager) to fasten the fitting to the wire.
Other tools that will be handy to complete the job are IF122X (Wire Cutter) and IF133X (Spanner Tensioner).
Do you have any instructions on how to install the kit ?
We sure do. Click on this link to download a PDF.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
Where would you normally use Stainless Wire Balustrade Kit G ?
For hydraulically swaged 3.2mm cable balustrading between timber posts. (Not suitable for metal posts)
This kit can be used for both horizontal and angled (stair) balustrade.
What parts make up the kit ?
1 x SSW052-6 (Lag Terminal Right Hand Thread)
1 x SSW049-6 (Lag Bottle Screw)
What are the fittings made out of ?
316 Stainless Steel, which means they can be used both in external and internal application.
Which wire cable rope is best suited ?
The fittings will work only with 3.2mm stainless wire cable rope.
1 x 19 configuration for the cable is the best fit, but 7 x 7 and 7 x 19 will also work.
Which tools do I need ?
The SSW052-6 (Lag Terminal Right Hand Thread) and SSW049-6 (Lag Bottle Screw) require the use of the IF120X (Hydraulic Swager) to fasten the fitting to the wire.
Other tools that will be handy to complete the job are IF122X (Wire Cutter) and IF133X (Spanner Tensioner).
Do you have any instructions on how to install the kit ?
We sure do. Click on this link to download a PDF.
For hydraulically swaged 3.2mm cable balustrading between timber posts. (Not suitable for metal posts)
This kit can be used for both horizontal and angled (stair) balustrade.
What parts make up the kit ?
1 x SSW052-6 (Lag Terminal Right Hand Thread)
1 x SSW049-6 (Lag Bottle Screw)
What are the fittings made out of ?
316 Stainless Steel, which means they can be used both in external and internal application.
Which wire cable rope is best suited ?
The fittings will work only with 3.2mm stainless wire cable rope.
1 x 19 configuration for the cable is the best fit, but 7 x 7 and 7 x 19 will also work.
Which tools do I need ?
The SSW052-6 (Lag Terminal Right Hand Thread) and SSW049-6 (Lag Bottle Screw) require the use of the IF120X (Hydraulic Swager) to fasten the fitting to the wire.
Other tools that will be handy to complete the job are IF122X (Wire Cutter) and IF133X (Spanner Tensioner).
Do you have any instructions on how to install the kit ?
We sure do. Click on this link to download a PDF.
